
SanDisk
SanDisk SDSDXSF-032G-GNCI2 32GB Extreme Plus SDHC 2-Pack
★★★★★
Two Class 10 UHS-I 32GB cards in one pack give you redundant high-speed storage for back-to-back shoots without downtime.
Check availability
Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.
Notice a mistake? Let Us Know
Overview
Key Features
SanDisk 32GB SDHC Memory Card Extreme Plus Class 10 UHS-I - 2-Pack
Specifications
Brand
SanDisk
Model
SDSDXSF-032G-GNCI2
Capacity
32GB per card
Card Type
SDHC
Speed Class
Class 10, UHS-I, U3
Rated Read Speed
Up to 95MB/s
Rated Write Speed
Up to 90MB/s
Package Quantity
2-Pack
Pros & Cons
👍 Pros
- UHS-I U3 rating guarantees 30MB/s minimum sustained write — the requirement for reliable 4K capture on compatible devices
- 95MB/s rated read speed accelerates offload to a UHS-I card reader versus slower Class 10-only alternatives
- 2-pack provides immediate redundancy for dual-card camera slots or back-to-back shooting sessions
- 32GB per card is optimal capacity for most shooters — large enough for a full session, small enough that a card failure doesn't lose an entire day
- SanDisk's Extreme Plus line has documented long-term reliability across millions of units in the field
👎 Cons
- SDHC format caps capacity at 32GB — users needing 64GB+ per card must move to SDXC variants
- UHS-I bus maxes at ~104MB/s theoretical — high-bitrate cinema cameras requiring UHS-II speeds will see a bottleneck on this card
- SATA SSD-class read speeds (95MB/s) create a transfer bottleneck when offloading to PCIe NVMe-equipped computers — a UHS-II reader won't help here
- No included card case in the 2-pack — two loose cards increase the risk of physical damage or loss
- Class 10 minimum write guarantee (10MB/s) is the spec floor; sustained high-bitrate recording can still cause buffer overflow on cameras with inefficient write management
Frequently Asked Questions
What is the rated read and write speed of the Extreme Plus, and what does UHS-I Class 10 mean in practice?
SanDisk's Extreme Plus SDHC is rated for up to 95MB/s read and 90MB/s write under the UHS-I bus. Class 10 guarantees a minimum sustained write of 10MB/s, which is the floor for 1080p video recording. UHS-I Speed Class 3 (U3) — which this card also carries — raises that minimum to 30MB/s sustained, enabling 4K capture on compatible cameras.
Will these cards work in devices that only support UHS-I, not UHS-II?
Yes — UHS-I is fully backward-compatible with standard SD card slots. In a UHS-I reader or camera slot, these cards operate at full rated speeds. In older non-UHS devices, they fall back to the legacy SD bus but remain fully functional at reduced throughput.
Can these 32GB SDHC cards be used in SDXC-only card slots?
No. SDHC (up to 32GB) and SDXC (64GB and above) use different file system specifications — SDHC uses FAT32, SDXC uses exFAT. A device that requires SDXC will not read an SDHC card. Most devices support both; check your camera or recorder's manual to confirm SDHC compatibility.
Is the 2-pack two identical cards, or are there different speed tiers in the bundle?
Both cards in the SDSDXSF-032G-GNCI2 2-pack are identical SanDisk 32GB Extreme Plus SDHC cards — same capacity, same speed class, same firmware. This makes them interchangeable in a dual-card camera body or for A/B redundancy workflows.
How does the 32GB capacity translate to recording time for video?
At 1080p/60fps (typical bitrate 35–50Mbps), 32GB holds approximately 70–90 minutes of footage. At 4K/30fps (80–100Mbps), expect 35–45 minutes per card. Shooting RAW stills at 24MP yields roughly 800–1,000 images per card depending on scene complexity.