Sennheiser

Sennheiser PCV 05 Combo Audio Adapter for Gaming Headsets

4.6 (2083 reviews)

Sennheiser's PCV 05 bridges the gap between dual-plug PC headsets and single-jack devices — one 150mm adapter, clean signal, no compromises.

View price on Amazon
Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Sennheiser PCV 05 addresses a specific and common incompatibility: PC gaming headsets traditionally use two separate 3.5mm plugs — one for stereo audio output, one for microphone input — but consoles, smartphones, and modern laptops increasingly use a single 4-pole 3.5mm jack that combines both signals. The PCV 05 is a 150mm passive splitter that converts those two plugs into a single CTIA-standard 4-pole output. That's the entire job, and it does it cleanly. The adapter is listed as compatible with Mac, PS4, PS5, Xbox One, Xbox Series X|S, phones, tablets, and the Nintendo Switch — any device with a standard 4-pole 3.5mm headset jack.

Build quality is appropriate for what it is: a short-run analog adapter meant to live permanently between your headset and your controller. The icon and color coding on the female jacks (headphone and microphone symbols, plus color differentiation) is a practical design choice that prevents the common error of swapping the two plugs. At 150mm, it's designed to sit close to the source device rather than trail across a desk — by design, not as a cost-cutting measure. For Sennheiser PC 3xx or EPOS headset owners connecting to a console for the first time, this is the correct, purpose-made solution.

Key Features

Headset Splitter Cable Combo Adaptor: 1 x 3.5 mm (male) to 2 x 3.5 mm (female) splitter

Wide Console and Device Compatibility - For devices with a single 4-pole 3.5mm jacks, e.g., consoles, phones and tablets

1 x 3.5 mm 4 Pole jack plug

EPOS Analogue Compatibility - High-quality adaptor for all EPOS headsets with analogue connection

Color and Icon Coded - Convenient 150 mm cable length, with both icon and color-coded connectors

Specifications

Brand
Sennheiser
Model
PCV 05
Input
2 x 3.5mm stereo jacks (separate audio + microphone)
Output
1 x 3.5mm 4-pole TRRS jack
Cable Length
150mm
Compatible Devices
Mac, PS4, PS5, Xbox One, Xbox Series X|S, phones, tablets, Nintendo Switch
Connector Coding
Icon and color-coded

Pros & Cons

👍 Pros

  • Cleanly solves the dual-plug-to-single-jack problem without needing software remapping or USB workarounds
  • Icon and color-coded connectors eliminate the mic-in-headphone-port mistake every gamer has made at least once
  • 150mm cable length keeps the connection tidy and close to the device
  • Broad compatibility across PS4, PS5, Xbox, Switch, PC, phones, and tablets from a single adapter
  • Passive analog design means zero latency and no driver installation required

👎 Cons

  • 150mm cable may be uncomfortably short if your controller sits far from your headset connection point
  • Analog-only — no USB-C, optical, or digital audio support
  • No inline volume or mute control on the adapter itself
  • Not compatible with headsets using proprietary or non-standard connector configurations

Frequently Asked Questions

It's engineered for Sennheiser and EPOS gaming headsets that use separate 3.5mm plugs for audio and microphone. It will also work with any third-party headset that uses the same two-plug analog configuration, as long as the plugs are standard 3.5mm TRS.
Yes. Both consoles use a single 4-pole 3.5mm jack on the controller, which is exactly what the PCV 05 is designed to connect to. The adapter outputs a 4-pole TRRS plug that is compatible with PS4, PS5, Xbox One, Xbox Series X|S, Nintendo Switch, and most modern phones and tablets.
No meaningful degradation in a properly wired passive adapter at this price point. The PCV 05 is a passive analog splitter — no DAC, no processing — so signal quality is entirely dependent on the source device and headset. You won't introduce noise or compression artifacts.
The 150mm length is intentional — it keeps the adapter tight to your controller or device rather than creating a dangling cable mess. If you need more reach, a short 3.5mm 4-pole extension cable solves it without introducing the PCV 05 itself as a point of failure.
No. The PCV 05 is a purely analog adapter. USB headsets bypass this entirely and connect directly to a port — no adapter needed or compatible.