Brands Guides About
Coolpie 5-in-1 SSD Cloner Dock with Wireless HDMI Transmitter Kit — main product image
Coolpie 5-in-1 SSD Cloner Dock with Wireless HDMI Transmitter Kit
Coolpie 5-in-1 SSD Cloner Dock with Wireless HDMI Transmitter Kit
Coolpie 5-in-1 SSD Cloner Dock with Wireless HDMI Transmitter Kit
Coolpie 5-in-1 SSD Cloner Dock with Wireless HDMI Transmitter Kit
Coolpie 5-in-1 SSD Cloner Dock with Wireless HDMI Transmitter Kit
Coolpie 5-in-1 SSD Cloner Dock with Wireless HDMI Transmitter Kit
Coolpie

Coolpie 5-in-1 SSD Cloner Dock with Wireless HDMI Transmitter Kit

A single unit that clones five drive types offline with no computer and mirrors your screen wirelessly to two displays at once

$247.98*
✓ In Stock on Amazon.com
View on Amazon

*Price sourced from Amazon.com. Last updated:Aug 05, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Coolpie 5-in-1 is an unusual hybrid. Half of it is an SSD cloner and dock; the other half is a wireless HDMI broadcasting kit. As a duplicator it supports five cross-protocol offline modes, accepting M.2 NVMe, M.2 SATA, mSATA, and 2.5/3.5-inch SATA drives and copying them onto an NVMe target. The appeal here is simplicity: a built-in smart chip identifies each drive's protocol on its own, so there is no manual mode-picking before a copy runs. That makes it a candidate for anyone handling system migration or routine data backup across mismatched drive types.

Construction centers on a dual-bay layout that keeps two drives seated together, useful for file sorting or long-term storage. Two working modes define daily use. Offline, a one-click clone runs with no computer attached; over USB, the unit reads and writes files directly for moving large video, photo, and game data. Note that the two cannot overlap—clone mode shuts off the moment the data cable is connected, so offline duplication means pulling the cable first. The wireless HDMI portion pairs one transmitter with two receivers, mirroring audio and video from a PC, projector, TV, monitor, or laptop. It runs on 5.8GHz single-band technology with high-gain external antennas, is rated to 100 meters in the open and roughly 50 meters through walls, and needs its own power supply. It fits home theater, conference, classroom, or bar setups where more than one screen is in play.

Key Features

Support 5 cross-protocol offline clone modes: M.2 NVMe→NVMe / M.2 SATA→NVMe / mSATA→NVMe / 2.5/3.5” SATA→NVMe. Built-in smart chip automatically identifies all hard drive protocols, no manual distinction needed. Compatible with 5 types of storage drives for system migration & data backup.

Two independent working modes to meet different needs: Offline one-click clone without computer; PC connection for direct file read & write. Important Note: Clone function is disabled when USB data cable plugged in. Unplug the cable first if you need offline disk duplication.

Stable high-speed data transfer speed under PC read-write mode, greatly accelerate transmission of large video, photo and game files. Dual bay design supports placing two hard drives at the same time for daily file sorting and permanent data storage.

Coolpie wireless HDMI transmitter and 2 receivers allow mirroring video and audio wireless from your PC, projector, TV, monitor, laptop. Perfect for multi-screen collaboration, home theater, conference, classroom, bar, restaurant, or any setup requiring multi-display functionality. (The product requires a power supply)

Equipped with 5.8GHz single-band technology and high-gain external antennas, this wireless HDMI unit delivers a range of up to 100 meters (350 feet) in open spaces, with a proven reach of 50 meters through solid barriers. The latency is reduced to approximately 0.1 seconds—imperceptible to the human eye. Whether for wedding DJ control, conference room projection, outdoor open-air cinema, or multi-screen bar setups, it banishes stuttering and audio-visual desynchronization. While competitors in t

Specifications

Brand
Coolpie
Product Type
SSD cloner dock and wireless HDMI kit
Clone Modes
5 cross-protocol offline modes
Supported Drives
M.2 NVMe, M.2 SATA, mSATA, 2.5/3.5-inch SATA
Clone Target
NVMe
Bays
Dual bay
Working Modes
Offline one-click clone / PC read-write
Wireless HDMI Units
1 transmitter and 2 receivers
Wireless Band
5.8GHz single-band
Antennas
High-gain external
Wireless Range
Up to 100 m open space, ~50 m through barriers
Latency
Approximately 0.1 seconds

Frequently Asked Questions

No. The clone function is disabled whenever the USB data cable is plugged in. Unplug the cable first to run an offline one-click duplication without a computer.
It supports M.2 NVMe, M.2 SATA, mSATA, and 2.5/3.5-inch SATA source drives across five offline modes, and all modes clone onto an NVMe target drive.
No. A built-in smart chip automatically identifies each drive's protocol, so there is no manual distinction needed between NVMe and SATA before you start a copy.
It is rated for up to 100 meters in open space and about 50 meters through solid barriers, using 5.8GHz single-band technology with high-gain external antennas.
Yes. The wireless HDMI unit requires a power supply. It does not run on HDMI-port power alone, so plan for an outlet at the transmitter and receiver locations.
Yes. The kit includes one transmitter and two receivers, mirroring video and audio to two displays simultaneously for multi-screen collaboration or home theater setups.

Related Products