
G.Skill
G.Skill F4-2666C18S-16GRS 16GB DDR4 2666MHz SO-DIMM
★★★★★
18in16GB DDR4
Sixteen gigabytes at 2666MHz in a low-profile SO-DIMM — the upgrade that turns a bottlenecked laptop into a capable multitasker.
$249.99*
View on Amazon
✓ In Stock on Amazon.com
*Price sourced from Amazon.com. Last updated:Jul 14, 2026.Price and availability are subject to change.
Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.
Notice a mistake? Let Us Know
Overview
Key Features
DDR4-2666MHz (PC4-21300), CL18-18-18-43, 1.2 Volt, Non-ECC, 260 pin, Single Channel
Extreme Performance DDR4 Memory
Optimized compatibility with 6th Gen Intel Core Processors
1.2V Low Voltage Support
Module Height: 30mm / 1.18in
Specifications
Brand
G.Skill
Model
F4-2666C18S-16GRS
Capacity
16GB
Memory Type
DDR4 SO-DIMM
Speed
2666MHz (PC4-21300)
CAS Latency
CL18-18-18-43
Voltage
1.2V
Form Factor
260-pin SO-DIMM
Module Height
30mm / 1.18 in
Channel
Single Channel
ECC
Non-ECC
Similar Products
Other products from the same family that visitors often consider:
✓ AvailableG.Skill F4-2666C19D-16GRS 16GB DDR4 SO-DIMM: 2666MHz Laptop Memory Kit
$109.99
View on Amazon →
✓ AvailableG.Skill F4-2666C19S-16GIS 16GB DDR4 2666MHz Memory
$203.89
View on Amazon →
Currently UnavailableG.Skill FBA_F4-2666C15D-16GVR Ripjaws V 16GB DDR4 2666MHz RAM
Check on Amazon →
✓ AvailableG.Skill F4-2666C19D-16GNT 16GB (2x8GB) DDR4 2666MHz DIMM Memory Kit
$186.13
View on Amazon →
✓ AvailableG.Skill F4-2400C16S-16GRS 16GB DDR4 2400 SO-DIMM Memory
$104.99
View on Amazon →Pros & Cons
👍 Pros
- 16GB capacity provides meaningful headroom for multitasking, browser-heavy workflows, and memory-hungry applications on a single module
- 2666MHz speed at 1.2V operates within DDR4 spec without requiring any BIOS configuration changes
- 30mm low-profile height fits standard laptop SO-DIMM slots without clearance concerns
- Non-ECC design is appropriate for consumer and prosumer laptops where ECC is neither supported nor needed
- Single module leaves a second slot open for future capacity expansion if the system supports it
👎 Cons
- Single-channel configuration means you won't see the bandwidth gains of a dual-channel 2x8GB setup — memory-bandwidth-sensitive tasks will perform noticeably better with a matched pair
- CL18 timing is on the looser end for DDR4-2666 — tighter kits exist at this speed for buyers who prioritize latency over cost
- Locked to DDR4 — not compatible with DDR5 platforms or older DDR3 systems
- No onboard heatspreader, which is standard for SO-DIMMs but means thermal management relies entirely on the laptop's airflow
Frequently Asked Questions
Will this module work in my laptop?
It's compatible with systems that accept a single 260-pin DDR4 SO-DIMM. It was specifically optimized for 6th Gen Intel Core platforms, but it also runs in most DDR4 SO-DIMM slots running at or below 2666MHz. Confirm your laptop's maximum supported speed and slot count before purchasing — the module will downclock to match your system's rated speed if needed.
Is this a single module or a matched pair?
This is a single 16GB module. It operates in single-channel mode on its own. If your laptop has two SO-DIMM slots and you want dual-channel bandwidth, you would need two modules installed together.
What does CL18 latency mean, and does it matter for everyday use?
CL18 means the module takes 18 clock cycles to respond to a read command. At 2666MHz, that translates to roughly 13.5 nanoseconds of latency — acceptable for general computing and productivity workloads. It's not optimized for ultra-low-latency workloads, but for the vast majority of users upgrading from slower or lower-capacity RAM, the capacity gain far outweighs the latency difference.
Does the 30mm module height cause clearance issues inside laptops?
At 30mm (1.18 inches), this module stays within the standard SO-DIMM height spec used in most laptops. Clearance issues are rare with standard SO-DIMM designs, but ultra-thin laptops with modified slot orientations may have restrictions — check your service manual if you're uncertain.
What voltage does this module require?
It runs at 1.2V, which is the standard DDR4 operating voltage. No modified voltage settings or BIOS adjustments are required.