Thermaltake

Thermaltake PS-SPD-0650NNFABB-1* 650W 80+ Bronze PSU

4.0 (4 reviews)
650W80 PLUSBat

80+ Bronze certified 650W power supply with flat cables for clean builds and reliable everyday performance.

$141.61*
In Stock on Amazon.com
View on Amazon

*Price sourced from Amazon.com. Last updated:Jun 27, 2026.Price and availability are subject to change.

Affiliate Disclosure: Studio Supplies may earn a commission from qualifying purchases made through links on this page, at no additional cost to you. This helps support our editorial team.

Notice a mistake? Let Us Know

Overview

The Thermaltake Smart BX1 650W is an 80+ Bronze certified power supply built for mainstream desktop systems. Its 650W capacity is well-matched to single-GPU gaming PCs, home workstations, and everyday desktops, delivering reliable power with at least 82% efficiency at typical loads. The unit accepts 100V to 240V input automatically, eliminating the need for a manual voltage selector and making it compatible with electrical standards worldwide.

Thermaltake equips the Smart BX1 with all-flat cables—a notable quality-of-life feature at this price point that makes cable routing and management significantly easier than bundled round cables. Cooling comes from a 120mm hydraulic bearing fan, a design that typically runs quieter and lasts longer than the sleeve bearing fans found in many competing budget units. While the non-modular cable layout means all leads are permanently attached, the flat form factor helps keep unused cables tucked away in most mid-tower and full-tower cases.

Key Features

Power Good Signal - 100-500 msec Hold Up Time - 16msec at 70% of full load Input Current - 12A max; input Frequency Range - 50Hz - 60Hz Input Voltage - 100V 240V

Operating Temperature - 5°C to +40°C Operating Humidity - 20% to 85%, non-condensing Storage Temperature - -40°C to + 55°C Storage Humidity - 10% to 95%, non-condensing

Cooling System - 12cm Hydraulic bearing fan Efficiency - Meet 80 PLUSBat 115Vac input; mTBF - 100, 000 hrs minimum Safety Approval - CE/CB/TUV/ UL/ FCC/ BSMI PCI-E 6+2pin - 2

Bivolt Product

Specifications

Wattage
650W
Efficiency
80+ Bronze
Input Voltage
100V – 240V
Cooling
120mm Hydraulic Bearing Fan
Cable Type
All-Flat, Non-Modular
Brand
Thermaltake
Model
PS-SPD-0650NNFABB-1

Similar Products

Other products from the same family that visitors often consider:

Pros & Cons

👍 Pros

  • 80+ Bronze efficiency reduces energy waste and heat output during operation
  • All-flat cable design simplifies routing in mid-tower and full-tower cases
  • 120mm hydraulic bearing fan provides quieter and longer-lasting cooling than sleeve bearing alternatives
  • 100V–240V auto-ranging input works on any standard power grid without manual switching
  • 650W capacity supports mainstream single-GPU desktop builds with adequate headroom

👎 Cons

  • Non-modular design means all cables are permanently attached, leaving unused cables to manage
  • 650W may be insufficient for high-end dual-GPU or enthusiast overclocking configurations
  • No semi-passive fan mode, so the fan runs continuously even at low loads
  • Lacks 80+ Gold or higher certification for users seeking maximum efficiency

Frequently Asked Questions

It is 80+ Bronze certified, meaning it operates at a minimum of 82% efficiency at typical loads, reducing wasted energy as heat.
No, it is a non-modular design, but it features all-flat cables that are easier to route and tuck away for cleaner cable management than traditional round cables.
It uses a 120mm hydraulic bearing fan, which provides quiet and durable cooling compared to standard sleeve bearing fans.
It accepts 100V to 240V input, making it compatible with power grids worldwide without a manual voltage switch.
Yes. A 650W supply comfortably powers builds with a mid-range GPU and a modern six- or eight-core processor, with some headroom to spare.